Consider a system with a register for storing AES key for encryption or decryption. The key is 128 bits, implemented as a set of four 32-bit registers. The key registers are assets and registers, AES_KEY_READ_POLICY and AES_KEY_WRITE_POLICY, and are defined to provide necessary access controls. The read-policy register defines which agents can read the AES-key registers, and write-policy register defines which agents can program or write to those registers. Each register is a 32-bit register, and it can support access control for a maximum of 32 agents. The number of the bit when set (i.e., "1") allows respective action from an agent whose identity matches the number of the bit and, if "0" (i.e., Clear), disallows the respective action to that corresponding agent.
In the above example, there is only one policy register that controls access to both read and write accesses to the AES-key registers, and thus the design is not granular enough to separate read and writes access for different agents. Here, agent with identities "1" and "2" can both read and write.
BadOther
Register Field description AES_ENC_DEC_KEY_0 AES key [0:31] for encryption or decryptionDefault 0x00000000 AES_ENC_DEC_KEY_1 AES key [32:63] for encryption or decryptionDefault 0x00000000 AES_ENC_DEC_KEY_2 AES key [64:95] for encryption or decryptionDefault 0x00000000 AES_ENC_DEC_KEY_4 AES key [96:127] for encryption or decryptionDefault 0x00000000 AES_KEY_READ_WRITE_POLICY [31:0] Default 0x00000006 - meaning agent with identities "1" and "2" can both read from and write to key registers
Consider a system with a register for storing AES key for encryption or decryption. The key is 128 bits, implemented as a set of four 32-bit registers. The key registers are assets and registers, AES_KEY_READ_POLICY and AES_KEY_WRITE_POLICY, and are defined to provide necessary access controls. The read-policy register defines which agents can read the AES-key registers, and write-policy register defines which agents can program or write to those registers. Each register is a 32-bit register, and it can support access control for a maximum of 32 agents. The number of the bit when set (i.e., "1") allows respective action from an agent whose identity matches the number of the bit and, if "0" (i.e., Clear), disallows the respective action to that corresponding agent.
In the above example, there is only one policy register that controls access to both read and write accesses to the AES-key registers, and thus the design is not granular enough to separate read and writes access for different agents. Here, agent with identities "1" and "2" can both read and write.
GoodOther
AES_KEY_READ_POLICY [31:0] Default 0x00000002 - meaning only Crypto engine with identity "1" can read registers: AES_ENC_DEC_KEY_0, AES_ENC_DEC_KEY_1, AES_ENC_DEC_KEY_2, AES_ENC_DEC_KEY_3 AES_KEY_WRITE_POLICY [31:0] Default 0x00000004 - meaning only trusted firmware with identity "2" can program registers: AES_ENC_DEC_KEY_0, AES_ENC_DEC_KEY_1, AES_ENC_DEC_KEY_2, AES_ENC_DEC_KEY_3
Within the AXI node interface wrapper module in the RISC-V AXI module of the HACK@DAC'19 CVA6 SoC [REF-1346], an access control mechanism is employed to regulate the access of different privileged users to peripherals.
The AXI ensures that only users with appropriate privileges can access specific peripherals. For instance, a ROM module is accessible exclusively with Machine privilege, and AXI enforces that users attempting to read data from the ROM must possess machine privilege; otherwise, access to the ROM is denied. The access control information and configurations are stored in a ROM.
BadVerilog
... for (i=0; i<NB_SUBORDINATE; i++) begin for (j=0; j<NB_MANAGER; j++) begin assign connectivity_map_o[i][j] = access_ctrl_i[i][j][priv_lvl_i] || ((j==6) && access_ctrl_i[i][7][priv_lvl_i]); end end ...
Within the AXI node interface wrapper module in the RISC-V AXI module of the HACK@DAC'19 CVA6 SoC [REF-1346], an access control mechanism is employed to regulate the access of different privileged users to peripherals.
The AXI ensures that only users with appropriate privileges can access specific peripherals. For instance, a ROM module is accessible exclusively with Machine privilege, and AXI enforces that users attempting to read data from the ROM must possess machine privilege; otherwise, access to the ROM is denied. The access control information and configurations are stored in a ROM.
GoodVerilog
... for (i=0; i<NB_SUBORDINATE; i++) begin for (j=0; j<NB_MANAGER; j++) begin assign connectivity_map_o[i][j] = access_ctrl_i[i][j][priv_lvl_i]; end end ...